Iclass 9696x Pvr Upgrade S9f4a126 !!HOT!!
How to Upgrade Your Iclass 9696x PVR with S9F4A126 Firmware
If you own an Iclass 9696x PVR digital satellite receiver, you might want to upgrade it with the latest firmware to enjoy better performance and features. In this article, we will show you how to do that easily and safely.
iclass 9696x pvr upgrade s9f4a126
The S9F4A126 firmware is the most recent and stable version for the Iclass 9696x PVR receiver. It has many advantages over the previous versions, such as:
Improved stability and speed
Support for more channels and satellites
Better compatibility with different types of dishes and LNBs
Enhanced security and encryption
More options for customization and settings
To upgrade your Iclass 9696x PVR receiver with the S9F4A126 firmware, you will need the following items:
A USB flash drive with at least 4 GB of free space
A computer with internet access
A USB cable to connect your receiver to your computer
The S9F4A126 firmware file, which you can download from here
The iCLASS Upgrade USB software, which you can download from here
The iCLASS Softcam USB software, which you can download from here
Once you have all these items ready, follow these steps to upgrade your receiver:
Format your USB flash drive to FAT32 format using your computer.
Copy the S9F4A126 firmware file to the root directory of your USB flash drive.
Copy the iCLASS Upgrade USB software and the iCLASS Softcam USB software to a separate folder on your USB flash drive.
Disconnect your receiver from the power source and connect it to your computer using the USB cable.
Run the iCLASS Upgrade USB software on your computer and select your receiver model from the list.
Click on the Browse button and locate the S9F4A126 firmware file on your USB flash drive.
Click on the Start button and wait for the software to detect your receiver and start the upgrade process.
Do not disconnect or turn off your receiver or computer during the upgrade process. It may take several minutes to complete.
When the upgrade process is finished, you will see a message saying Upgrade Success. Click on the OK button and close the software.
Disconnect your receiver from your computer and reconnect it to the power source.
Turn on your receiver and wait for it to boot up. You may need to reset some settings such as language, time zone, etc.
To activate the softcam feature, which allows you to watch encrypted channels without a card, follow these steps:
Insert your USB flash drive into your receivers USB port.
Go to Menu > System Setting > Upgrade By USB.
Select Softcam from the Upgrade Mode list.
Select All Code from the Upgrade File list.
Select Yes from the Start Burn list.
Wait for the softcam file to be loaded into your receivers memory. It may take a few seconds.
Press Exit to return to the main menu.
Congratulations! You have successfully upgraded your Iclass 9696x PVR receiver with the S9F4A126 firmware. You can now enjoy watching more channels and satellites with better quality and security. If you have any questions or problems, please refer to the user manual or contact the customer service of Iclass. Thank you for choosing Iclass products! c481cea774